© 2015 Flanders Scientific, Inc.
36
Color Management Menu
DIT LUTs
As of firmware update 1.0.00-1958, CFE 2 equipped monitors are capable of loading multiple custom DIT LUTs which do not
require you to profile the panel. You can use Lattice, the main component of Light Illusion’s LightSpace, or LightSpace FSI
LUTs software to convert and export LUTs in the FSI format. The LightSpace workflow is shown below.
Open LightSpace CMS
Select File \ Import \ YourLUT
Select File \ Export \ Choose FSI17_32bits (*.dat) as the export format.
In Lattice you should select .dat V2 as the export type.
Once the file is saved, change the file name to ditXX.dat where XX is a 2 digit
number ranging from 00 to 16. The monitor can store up to 16 DIT LUTs at a
time. The naming structure is ditXX.dat with valid LUT names ranging from
dit01.dat to dit16.dat.
