© 2015 Flanders Scientific, Inc.
33
GPI Menu
Main Menu
GPI
Function
GPI 1
Keyboard Locking
Scopes & Audio Meters
GPI 2
SDI 2 Input
Video
GPI 3
Red Tally
Audio
GPI 4
Green Tally
Marker
GPI 5
UNDEF
System
GPI 6
Toggle Back Light
Alarm
GPI 7
DVI Input
OSD
GPI
Color Management
System Status
Support
This menu allows you to set 7 assignable functions for remote control via the GPI interface on the back of the monitor (RJ-
45 connector labeled GPI). Simply select one of the GPI slots, 1 through 7, and press ENTER to generate a list of available
functions that can be toggled using the GPI interface.
87654321
When looking at the GPI RJ-45 Connector located on the back of the monitor the pins are arranged 1 through 8 from right to
left. This GPI interface is a contact closure based system and PIN 5 is always the ground. The GPI numbering on the GPI
menu corresponds to the physical Pin assignments as follows:
Menu
RJ-45 Pin
GPI 1
Pin 1
GPI 2
Pin 2
GPI 3
Pin 3
GPI 4
Pin 4
GPI 5
Pin 6
GPI 6
Pin 7
GPI 7
Pin 8
If using FSI’s GPI Keypad Lock to lockout the monitor’s keypad or menu the corresponding Keyboard Locking or Menu
Locking function must be set to GPI 1.
NOTE: As of firmware version
9.53-1907 or later you must set
the UDisk Mode (System Menu)
to OFF in order to use the GPI
Contact Closure port for remote
control.