Oil-Free Scroll Compressor 4kW ~ 15kW
Note: there are stripe numbers for
dynamic and static scroll when in-
serting sealing stripes. The assem-
bly is directional. The cut shall face
toward central exit of scroll.
7.5 Measures after maintenance
has been performed
After completion of the maintenance work and
before switching the machine on, carry out the
following steps:
1.
Check whether all previously-removed
protective equipment and covers have been
replaced properly.
2.
Ensure that all tools, materials and other
equipment used have been removed from the
work area.
3.
Carefully open the compressed air
network-side shut-off valve.
4.
Clean the work area and remove any
substances such as liquids, processing
material or similar that may have escaped.
5.
Ensure that all safety equipment on the
machine functions perfectly.
6.
Check whether all previously-removed
protective equipment and covers have been
replaced properly.
7.
Document work on the machine in the
maintenance log (please see Appendix
C
‘Service and maintenance log’
).