FScurtis ECO Scroll Series, Instruction Manual

Page: 29 / 40

ES08 ‐ 15 Controller v1.01.05
2022 ‐ 02 ‐ 03 FS ‐ Curtis Page 27
Symbol
or Field
Name Description
Password
To View
Password
To Edit
Run Time
Remaining
Running hours until next scheduled
maintenance.
User Service
Elapsed Time
Remaining
Elapsed hours until next scheduled
maintenance.
User Service
Timer Reset
Button
AFTER completing the relevant maintenance
task(s) as described in the Instruction
Manual, press and hold for two seconds to
reset both the run time remaining and
elapsed time remaining values.
User Service
Previous Screen
Press to go back to the previous screen,
which is usually the maintenance status
screen.
User n/a
Next Screen
Press to go forward to the next screen,
which is limited to moving between the air-
end, tip seal and bearing grease
maintenance screens.
User n/a
The set values for the run time and elapsed time maintenance intervals for each of the component
maintenance screens are listed in Table 2.10. Please refer to the Instruction Manual for detailed guidance
about the maintenance procedures.
Table 2.10 – Run Time and Elapsed Time Maintenance Interval Settings
Component
Run Time Maintenance Interval
(hours)
Elapsed Time Maintenance Interval
(hours)
Motor 20,000 70,080
V-Belt 2,500 8,760
Air-End 20,000 70,080
Tip Seal 10,000 35,040
Bearing Grease 10,000 35,040
Air Filter 2,500 8,760
High Pressure Hose 10,000 35,040
Check Valve 5,000 17,520
Safety Valve 2,500 8,760
Note: The elapsed time measurement is only accumulated while the compressor set’s power supply is