FS TAP Series, Reference Manual

Page: 70 / 340

TAP Series Switch Command Line Reference
70
5
TAP Commands
5.1 tap-group
Use this command to create a TAP group and enter the tap configuration mode.
Use the no form of this command to delete the TAP group.
Command Syntax
tap-group TAPNAME ( NUM |)
no tap-group
TAPNAME
TAPNAME Tap Group Name string, which should begin
with a-z/A-Z, valid characters are 0-9A-Za-z.-
, maximum length is 20 characters.
NUM Tap Group ID, range 1-512
Command Mode
Global Configuration
Default
None
Usage
Use this command to create a TAP group and enter the tap configuration mode.
Use the no form of this command to delete the TAP group.
This device supports at most 512 TAP groups.