TAP Series Switch Command Line Reference
219
Usage
None
Examples
The following example shows how to set console sync line stop bits one-bit stop:
Switch# configure terminal
Switch(config)# line console 0
Switch(config-line)# stopbits 1
The following example shows how to set console sync line stop bits to default value:
Switch# configure terminal
Switch(config)# line console 0
Switch(config-line)# no stopbits
Related Commands
show console
14.61
databits
Use this command to set console number of data bits.
Use the no form of this command to set console number of data bits per character to default
value.
Command Syntax
databits
(
7
|
8
)
no databits
7
7-bit databits.
8
8-bit databits.
Command Mode
Line-CON
Summary of Contents for TAP Series
Page 1: ...FS Network TAP Series Command Line Reference...
Page 81: ...TAP Series Switch Command Line Reference 81 Related Commands show timestamp sync...
Page 159: ...TAP Series Switch Command Line Reference 159 Related Commands show snmp server inform receiver...
Page 226: ...TAP Series Switch Command Line Reference 226 Related Commands None...
