IP PBXs USER MANUAL
www.fs.com
47
In the
Group Number
field, a default group number is given. The number could be changed within the Paging Group Extension
Number Range listed on
Telephony -> Preferences -> Global PBX Options
page, Extension Ranges section.
In the
Name
field a name should be given to identify this paging group.
In the
Mode
dropdown list, if “Simplex” is selected, calling the group number will page on the group members, if “Duplex”, the
group members are able to talk back to the caller (intercom).
In the
Group Members
field, select the desired user extensions, make sure all extensions you selected are desktop based IP
phones, otherwise if the phone is an analog one, paging/intercom will not work.
Except group paging and intercom, extension users could also paging/intercom an individual extension by using feature codes, please
refer to introductions in
section.
8.6
Smart DID
Path:
Telephony -> Advanced Features -> Smart DID
With Smart DID feature, the IPPBX system has the ability to route an inbound call directly to an extension if the extension had previously
called or tried to call the external number. It is convenient for the called party to make a call back and be directly routed to the extension
that called them without going through the IVR menu or reception desk.
For example, extension 100 called external number 1234567, no matter this number answered or not, when the number tries to ring
back, the call will go directly to extension 100.
If you want this to happen, please use the
Enable Smart DID
switch to turn on this feature.
In
Time of Validation
dropdown list choose how long the system to save these outbound call records. When the records expired, the
inbound calls will be routed according to you inbound routes settings.
In
Apply to Trunk/Trunks
field, you have to select the trunk/trunks Smart DID feature will be applied to.