IP PBXs USER MANUAL
www.fs.com
32
6
Outbound Control
By default if you’ve not configured any outbound control settings, the extension users are not able to make outbound phone calls yet.
Please follow the instructions of this chapter to configure the IPPBX system for outbound phone calls.
6.1
Trunks
A trunk on an IPPBX system is essential for extensions to be able to make outbound phone calls. On IPPBX system, the trunks will be
detected and generated automatically at the first time of the system initialization.
6.1.1
FXO/GSM Trunks
Path:
Telephony -> Outbound Control -> Trunks
On the IPPBX front panel, red LED indicates the RJ11 interface is FXO. You should attach the telephone wire from your telecom socket to
the FXO ports.
If needed you may edit the trunk settings by click on the
button, or you may select the same type of trunks and click on
button to edit settings of the trunks together.
Select the parameters you want to configure before modifying them. Usually if the trunks are working fine please do not change these
settings.
Call recording
: To enable or disable call recording on the trunk/trunks. To enable recording you have options to record inbound
calls only, outbound calls only or both inbound and outbound calls.
Output Volume
: Sets the volume of the outgoing calls from the FXO channels.