M6500 Series NE Configuration Manual
156
Figure9-31 24-Hour Monitoring Data of FEC
9.2.3.3. Reset FEC Monitoring Data
When the current FEC monitoring data needs to be reset and to restart the monitoring, the 15-minute and
24-hour operation steps are the same. Taking 15-minute operation as an example, you can click on Reset
behind each piece of monitoring record to perform resetting of a single piece of monitoring record, or you can
select the first box to reset, as shown in the figure below.
Figure9-32 FEC Reset
Then click on Apply button, as shown in the figure, it will show that the operation is successful. After that, click
on Refresh button to refresh the whole page. At this time, the suspicious interval marker will become from
untrustworthy to trustworthy and the running time counts again from 0. All the time stamps are updated to the
latest time to read the value, and other data will be updated to that read at the latest time.
Figure9-33 FEC Successfully Reset
9.2.3.4. FEC Monitoring Data Shown As“-”
Here are the situations when the FEC monitoring data for the port is shown as -:
Summary of Contents for M6500 Series
