FS M6500 Series, Configuration Manual

Page: 141 / 185

M6500 Series NE Configuration Manual
140
Time, Acknowledge State,Acknowledge User, Acknowledge Time. (The functions are the same as that in the
current alarm. Here we will not go into much detail.)
In history alarm details, there is no recommended measure and linked document. There are three types of alarm
clearance states, which are automatic clearance, manual clearance and synchronous clearance.For the confirmation
state, it can only be"confirmation" state.There are two types of confirmer, which are automatic confirmation and
current login user confirmation, such as root.
8.3. Alarm Configuration
8.3.1. Alarm Configuration
Click on“ Configuration ”and click on“ Alarm Configuration ”in the submenu to enter the alarm configuration page,
as shown in the figure below:
Figure8-19 Alarm Configuration
The lower right corner of the alarm configuration interface can filter the number of alarms displayed on the
current page, and the number of displayed alarms per page can be adjusted to 10, 20, 50 and 100.
Figure8-17 Number of Alarms Displayed in Alarm Configuration