M6500 Series NE Configuration Manual
132
8. Alarm Management
8.1. Alarm Management Introduction
The alarm management function is a functional group that manages the faults of various network devices
managed by the NMS system during the operation of the system. The managed fault is commonly called alarm.
The NMS alarm management function manages two types and four levels of failures. The two types are
equipment alarm and communication alarm. The four levels are emergency, primary, secondary and warning.
8.2. Main Interface of Alarm Management
After logging in the NMS system, click on "
Maintain
" on the navigation bar – left click on the "
Alarm
Management
" menu -- the alarm management sub-menu appears, which includes: current alarm, history alarm,
alarm configuration, alarm notification configuration, alarm mailbox server configuration and enable sound.
In the upper right corner of the NMS main interface, alarm statistics are displayed, including the total number of
alarms and the number of alarms at all levels.
Figure8-1 Alarm Management
8.2.1. Current Alarm
Click on“
Current Alarm
”in the sub-menu to enter the current alarm page, as shown in the figure below:
Summary of Contents for M6500 Series
