FC730-4K USER MANUAL
www.fs.com
17
4.6.1 Homepage Introduction
Menu
All pages include two menu bars:
Real time monitoring: displaying video image
Parameter setup: with function buttons.
A.
Video Viewing Window
Video viewing window must be same as video resolution, the bigger the resolution is, the bigger the playing area is.
Double click viewing window, will show full-screen, double click again, will return to initialized size.
Status bar in viewing window shown as below:
1.Video playback pause button: control real-time video pause, stop the last picture, click recoverable video again.
2.Audio control buttons: can adjust the volume or set silent mode.
3.Full screen switch button.
B.
PTZ Setup
Pan and Tilt Control
Up, Down, Left and Right arrows and the home button allow you to manually drive the camera to the desired position.
Zoom
Zoom In and Zoom Out buttons allow for wide or narrow view of the space.
Focus
Focus In and Focus Out buttons allow for fine manual focus adjustment if the camera has any problems auto focusing on
the difficult object.
PTZ Speeds
Pan speed can be set at any rate between 1 ~ 24, Tilt speed can be set at any rate between 1 ~ 20. Zoom and Focus speeds
can be set at any rate between 0 ~ 7.
PTZ Presets
After manually setting up a shot that you would like to return to later, you can save presets for quick recall of these
positions. Type a number between 0 and 254 into the Preset box.
Click the "Set" button to save the current location with that preset number. Click the “Call” button to cause the camera to
return to that position. This enables smooth, quick and convenient control without the need to manually drive the camera.
You can set up preset that user want as below.
