FrSky D8RSP Instruction Manual Download Page 1

Page: 1 / 2

www.frsky-rc.com

Instruction Manual for FrSky D8RSP

1. Introduction

1.1 Compatibility

Compatible with FrSky two way telemetry modules: DFT, DJT, DHT, DHT-U

1.2 Specifications

Dimension: 56*25*14mm

Weight: 12.2g

Operating Voltage Range: 3.5V-10.0V

Operating Current: 100mA

Operating Range: 1.5km

Resolution: 3072 (>11bit)

2. Set

2.1 Bind procedure

1) Ascertain that the transmitter is in the PPM mode. Turn off the transmitter.

2) Turn on the transmitter while holding the F/S button on the transmitter module (Ensure that both

switches on the transmitter module are OFF when using D8RSP in two way mode). Release the button.

The RED LED on the transmitter module will flash, indicating the transmitter is ready to bind to the

receiver.

3) Connect battery to the receiver while holding the F/S button on the receiver. The LED on the

receiver will flash, indicating the binding process is completed. Turn off both the transmitter and the

receiver.

4) Turn on the transmitter and connect the battery to the receiver. The RED LED on the receiver

will indicate the receiver is receiving commands from the transmitter. The receiver/transmitter module

binding will not have to be repeated, unless one of the two is replaced.

Summary of Contents for D8RSP

Page 1: ...Ensure that both switches on the transmitter module are OFF when using D8RSP in two way mode Release the button The RED LED on the transmitter module will flash indicating the transmitter is ready to...

Page 2: ...the controls on the transmitter confirming that all controls operate normally to a distance of at least 30 meters 30 yds 6 Press the F S button of the transmitter module for 1S 4S to exit range check...