D. To Clear Memory
2. Press and
button at the same time to clear the contents of the selected
memory.
TO TURN OFF THE SCALE
Press [
ON
] to turn off the scale. Or, if no key has been pressed for around 15 seconds,
the scale turns off automatically.
12
BODY FAT SCALE – INSTRUCTION MANUAL
[ ]
[ ]
1. Follow step 1 in the section of
To Recall Settings From Memory
.
TROUBLESHOOTING
Check if the scale is powered up and initialized. If not, please refer to the Section
“Start Up”
2. Why display “Lo”?
Battery is running low. Replace the battery.
Initialization error. Step off the scale and wait until the scale automatically
ready for use again.
Instability error. Step off the scale and wait until the scale automatically switches
off. Step on the scale to repeat measurement again, stand still while computation
is in process.
Overload warning. Remove the weight immediately; otherwise, permanent
damage to the scale will occur.
Contact error. Impedance cannot be measured. Please make sure that you are
the metal contacts. If not, please refer to “
Operation section
”. You may need to
7.
may help to improve the electrical contact.
moisten your feet to improve the metal contact.
1. No weight display .
.
.
.
.
.
4. The message displays “Err 1”
3. The message displays “Err 0”
5. The message
“Err 2” when measuring
displays
6. The message displays “Err 3” when measuring body fat and total body water values
standing still on the scale and maintaining maximum contact between your feet and
and “Preparation Before Use - Insert the Battery”.
The message displays “Err 4” when measuring body fat and total body water values
reinitialize the scale, the display shows “0000” and then turns off. The scale is
switches off. Start the scale again by pressing lightly on the scale platform to
Estimated
body fat percentage is beyond the technical limit. Moistening your feet