Please contact one of our Product Specialists for assembly assistance or questions at 1-800-537-8484 or email [email protected].
Specialists are available weekdays 8:00 a.m. to 8:00 p.m. EST or Saturday 9:30 a.m. to 6:00 p.m.
FRONTGATE Collapsible Cushion Storage (Item #61584)
PLEASE READ ALL INSTRUCTIONS BEFORE SETTING UP, SAVE INSTRUCTIONS FOR FUTURE USE AND REFERENCE.
PAGE 1
For initial set up, begin with Step 1. Two Adults recommended for assembly/ set up of the storage unit.
Step 1:
Place steel axle through
the holes in the two legs at bottom.
Place wheel on each end of the
axle. Tighten the steel nuts on each
side of the axle with tools provided.
First tighten the right nut while
holding the other tool firm on the
left nut. Both will tighten
simultaneously.
Step 2:
Loosen the Velcro straps
on each side. (See image inset)
This will allow you to unfold the
cushion storage unit.
Step 3:
Gently pull outward on both
ends of the cushion storage. Push the
center locking device downward until
the push pin “locks” into the hole.
Step 4:
Tighten the three Velcro
straps at the bottom of the unit.
Step 5:
There are two attached
stabilizer bars connected to the
center pole on each side. Lift
each bar to the horizontal position
and snap them into the plastic
molded slot on each corner pole.
Step 6:
After locking all four top bars
into place you will need to lift the
four Velcro flaps over the bar to be
velcroed together. This will hold up
the sides of the cushion storage.
1
2
3
4
5
6
CARTON CONTENTS:
(Please check to make
sure you have received all contents before assembly)
Aluminum Folding Frame with Oxford Fabric Liner
UV Resistant, Weather Proof Oxford Fabric Cover
1 Plated Steel Axle
2 Plastic Wheels
2 Plated Steel Nuts
1 Set of Wrenches for Assembly of Wheels to Axle