Instructions
1)
Stop/Stand-by: In recording mode, press top of button one second, blue light will turn to yellow light, and it
will be in stop/stand-by mode. If recording again, just press once, blinking blue light turn on start.
2)
Turn off: In stand-by mode, while Yellow light is on. Press the ON/ OFF bottom for 5sec.The system will be
turned off, no LED light will be displayed.
3)
Save: While recording, press ON/OFF button to save file. (Please note that file saving process will be
related to the recording time, the longer the recording time, the longer the saving will take.) After saving the
video, the system will go into stand-by mode, (Yellow light on), press the ON/ OFF bottom again in the
system will begin recording again (Blue light).
4)
How to display recording time or adjustment recording pen built-in time
1. Open a text file and edit to show yyyy/mm/dd/hr/min/sec. Example: TIME, 2009/10/28/12:41:00;
The editing must be correct. Add 0 for single numbers. (For example day 8, need to be edited as 08)
simultaneously, maintained a few seconds in advance, guaranteeing synchronization with the current
time after the editing process.
The text file must be in the first line, do not leave any spaces.
2. Name of the text file must be: TIMECFG and save to your desktop.
3. Plug the recording pen into the USB port and copy the file next to the file DCIM.
4. Pull the recording pen out of the USB port and time setting process has been accomplished.
5. After setting up the time, it will be preserved in the recording pen.
5)
Once file is saved onto the pen. It can be deleted from your computer.
6)
When recharging, the Yellow light will blink, once fully charged, the Yellow light will turn blue.
Attention
1)
If the product does not react after pressing the function button, this typically means the system has crashed
and the reset bottom will need to be pressed.
2)
To lengthen the life of the battery do not charge for more than 4 hours.
Spy Camera Pen contains
USB2.0 extended line. USB charger, manual
Black pen refill x 2
Please contact one of our Product Specialists for assembly assistance or questions at 1-800-537-8484 or email
[email protected]. Specialists are available weekdays 8:00 a.m. to 8:00 p.m. EST or Saturday 9:30 a.m. to 6:00 p.m.