72In LED Lit Nutcracker Item # 158042
Nutcracker Operation:
1.
Before you connect the prong ends into the cord plug at back of the base of nutcracker,
Please remove the protective cap first. Twist cap attached to the cord onto the plug on
The base and secure it.
See Fig. 3 and Fig. 4
2.
Assembly of cord is required prior to plugging in to a nearby working outlet.
Connect the 2 prong ends to adapter. Twist the cap and secure cord to adapter tightly.
Now nutcracker is ready to plug in and operate. (
See Below
)
3.
Volume & Timer Switch is located on the side of the drum.
(See Right Sketch)
TIMER
:
A timer is built into the movement mechanism. Turning the “VOLUME” switch to ON position will turn on the lights,
activate drumming movement and begin music playing. Lights, hand movement and music including eight holiday songs will work
in a loop of 6 hours after pressing “TIMER” button until power is turned off. Please press “TIMER” button again to replay after 6
hours when the “VOLUME” switch still in alert status.
TROUBLESHOOTING
If the product LED lights/movement/musical does not work:
1. Make sure the transformer is connected to a power supply.
2. Make sure the product is properly connected to the transformer.
Do not force positions of hands – components must be aligned properly.
Do not block movement of hands.
CAUTION:
This is not a toy. Disconnect the plug when the unit is not under the supervision of an adult.
Specification of Adaptor:
Adaptor used: Input Voltage: 120V AC 60Hz 0.25A
Output Voltage: 12V AC 1.67A
Efficiency Level: IV 115V
