Axle dimension 1 m (39.37“)
Height approx. 2.20 m ( 86.61“)
Tego waLL ASSEMBLY MANUAL 2 m
Page 1: ...Axle dimension 1 m 39 37 Height approx 2 20 m 86 61 Tego waLL ASSEMBLY MANUAL 2 m ...
Page 2: ...d 2 Use a wooden block and a rubber mallet to hammer the base part into the stand 3 Unscrew all feet by 3 4 cm 1 18 1 57 Do it prior to setting the shelf up as adjusting it back to the required position is easier this way Tego waLL ASSEMBLY MANUAL 2 m Page 2 4 ...
Page 3: ...e feet if required In case of shelf elements heavily loaded on one side it would be sensible to either fix them to the wall to prevent from tipping over or to additionally install the free standing shelves on the base parts It shall be checked on site 5 Install the base panels 6 Install the bottom shelves towards the clicking position Tego waLL ASSEMBLY MANUAL 2 m Page 3 4 ...
Page 4: ...his layout hook in the rear panels one after another from the bottom to the top Remove the stabilising rear panels accordingly while doing so We hope you will enjoy the new shelf Tego waLL ASSEMBLY MANUAL 2 m Page 4 4 ...
