Fronius WF 15i, Operating Instructions Manual

Page: 42 / 72

Connecting the welding torch
Safety
WARNING!
Danger from electrical current.
This can result in serious personal injury and damage to property.
▶
Before starting work, switch off all devices and components involved and disconnect
them from the grid.
▶
Secure all devices and components involved so they cannot be switched back on.
▶
After opening the device, use a suitable measuring instrument to check that electric-
ally charged components (such as capacitors) have been discharged.
Connecting
MIG/MAG welding
torches
3
7
4
6
*
2
1
5
8
9
1
CAUTION!
Danger from electric current due to in-
adequate connections.
This can result in severe personal injury
and damage to property.
▶
All cables, leads and hosepacks must
be properly connected, undamaged,
correctly insulated and adequately di-
mensioned.
* Only if the coolant connections are
fitted in the wirefeeder and when
using a water-cooled welding torch
42