Fronius Wattpilot Go 11 J 2.0, Operating Instructions Manual, Page: 59 / 72

General
Residual current
detection The tripping characteristics of the residual current detection are as follows.
max. normative DC
max. normative AC
typ. DC of sensor
typ. AC of sensor
Safety functions - RFID access control (ID chip, reset card)
- Theft-proof charging socket lock
- Cable protection (lock not included)
- Residual current device with DC detection, 20 mA
AC
, 6 mA
DC
- Phase and voltage testing of the input voltage
- Auxiliary contact on the relays for checking the switching function
- Earthing detection (can be switched off, Norway mode)
- Current sensor, 3-phase
- Adapter recognition with automatic reduction to 16 A (Wattpilot Go 22 J 2.0)
- Temperature monitoring
Standard set-
tings
The Wattpilot works with the following standard settings during start-up, without
making any further settings in the Fronius Solar.wattpilot app. The standard set-
tings can be restored with the reset card.
59
EN