Fronius Wattpilot Go 11 J 2.0, Operating Instructions Manual, Page: 54 / 72

NOTE!
If the password has been forgotten, contact the support team.
Grid settings Proceed as follows to call up the "Grid settings".
Technician password
1
Click on "Grid settings".
2
Enter the "Technician password".
3
Click "OK".
Choose country
Different charging conditions are allowed depending on the country. In this se-
lection, all known default settings for the respective country are stored and can
be selected directly.
Max. charging current
This setting is used to adjust the maximum charging current of the Wattpilot.
Higher charging currents can no longer be selected.
NOTE!
PV optimisation works best when the maximum charging current is set as high as
the maximum allowed in the respective country. To start charging, the value must
be higher than the minimum current in the vehicle settings.
Max. 1-phase charging current
In some countries, charging via household sockets is only permitted up to a cer-
tain amperage. The Wattpilot automatically detects that it is a 1-phase socket
and limits the current to the set value.
NOTE!
For camping sockets, there is no need to set a special limit for the maximum 1-
phase charging current.
54