Fronius Wattpilot Go 11 J 2.0, Operating Instructions Manual, Page: 48 / 72

Energy per user Under "Range", a list showing the consumption of the registered ID chips can be
called up via "Energy per user". By entering "Total", the list can be downloaded as
a *.csv file. The following data is displayed in the file:
- Session number: Sequential number. A session is the period of time between
connecting and disconnecting the charging cable.
- Session identifier : Unique identification number.
- ID chip : Information about the registered ID chip. No entry if loaded without
ID chip.
- ECO operating mode [%]: Proportion of the charged energy from Eco Mode
as a percentage.
- Next Trip operating mode [%]: Proportion of the charged energy from Next
Trip Mode as a percentage.
- Start : Start date and time from which the charging cable is connected.
- End : End date and time when the charging cable is disconnected.
- Total duration: Period of time during which the Wattpilot is in use.
- Duration of active current flow: Period of time during which energy was be-
ing charged into the vehicle.
- Max. power [kW] : Maximum power in kilowatts reached during charging.
- Max. current [A] : Maximum current in amperes reached during charging.
- Energy [kWh]: Indicates the charged energy in kilowatt hours.
- PV energy [kWh]: Indicates the charged energy in kilowatt hours provided by
PV surplus.
- Battery energy [kWh] : Proportion of the charged energy in kilowatt hours
provided by a stationary energy storage device.
- Meter reading start [kWh]: Indicates the charged energy in kilowatt hours at
the start of the charge.
- Meter reading end [kWh] : Indicates the charged energy in kilowatt hours at
the end of the charge.
48