Fronius TransTig 1700, Operating Instructions Manual

Page: 21 / 124

General
Device concept
TransTig 2200 Job, MagicWave 1700 Job and
MagicWave 2200 Job with cooling unit
The MagicWave (MW)1700 / 2200 /
2500 / 3000 / 4000 / 5000 and Tran-
sTig (TT) 800 / 2200 / 2500 / 3000 /
4000 / 5000 TIG power sources are
completely digitised, microprocessor
controlled inverter power sources.
Their modular design and potential for
system add-ons ensure a high degree
of flexibility. The devices can be adap-
ted to any situation.
The straightforward operating
concept means that essential func-
tions can be seen at a glance and ad-
justed as required.
A standardised LocalNet interface
makes it easy to connect digital sys-
tem add-ons (e.g. JobMaster TIG
welding torches, robot welding
torches, remote control units, etc.).
Automatic cap-shaping for AC weld-
ing with MagicWave power sources
takes the diameter of the tungsten
electrode into account to help pro-
duce optimum results.
The power sources are generator-
compatible. They are exceptionally
sturdy in day-to-day operation thanks
to the protected control elements and
their powder-coated housings.
To optimise the ignition sequence in
TIG AC welding, the MagicWave takes
into account not only the diameter of
the electrode, but also its current
temperature, calculated with refer-
ence to the preceding welding time
and welding off-time.
MagicWave 3000 Job with cooling unit and
MagicWave 2500 Job
TransTig 5000 Job and MagicWave 5000 Job,
both with cooling unit and trolley
21
EN