Fronius TransSteel 2200, Operating Instructions Manual, Page: 56 / 136

Feeding in the
wire electrode
CAUTION!
Danger from springiness of spooled wire electrode.
It can cause injuries.
▶
When inserting the wire electrode into the wire drive, hold the end of the wire elec-
trode firmly.
1 2
3
4
Adjust the contact pressure as shown
below
-
Doing so will prevent deformation of
the wire electrode and ensure that the
wire is transported properly
Standard values for contact pressure with
smooth feed rollers:
-
Steel = 3 - 4
- CrNi = 3 - 4
Standard values for contact pressure with
toothed feed rollers:
-
Tubular covered electrodes = 3
- Aluminum = 1 - 3
56