Fronius TransSteel 2200, Operating Instructions Manual, Page: 47 / 136

Grid voltage
Country-specific setting
Power source fuse rating Welding current limitation
120 V
US
15 A MIG/MAG welding:
max. 105 A; 80 A at 100%*
SMAW:
max. 90 A; 70 A at 100%*
TIG welding:
max. 135 A; 105 A at 100%*
120 V
Std
16 A MIG/MAG welding:
max. 115 A; 105 A at 100%*
SMAW:
max. 100 A; 85 A at 100%*
TIG welding:
max. 140 A; 130 A at 100%*
120 V
US
20 A MIG/MAG welding:
max. 135 A; 105 A at 100%*
SMAW:
max. 110 A; 90 A at 100%*
TIG welding:
max. 160 A; 130 A at 100%*
230 V
Std
10 A MIG/MAG welding:
max. 145 A; 110 A at 100%*
SMAW:
max. 125 A; 90 A at 100%*
TIG welding:
max. 180 A; 135 A at 100%*
230 V
Std
13 A MIG/MAG welding:
max. 170 A; 140 A at 100%*
SMAW:
max. 150 A; 120 A at 100%*
TIG welding:
max. 200 A; 160 A at 100%*
230 V
Std
16 A MIG/MAG welding:
max. 210 A; 150 A at 100%*
SMAW:
max. 180 A; 130 A at 100%*
TIG welding:
max. 230 A; 170 A at 100%*
240 V
US
15 A MIG/MAG welding:
max. 210 A; 150 A at 100%*
SMAW:
max. 180 A; 130 A at 100%*
TIG welding:
max. 230 A; 170 A at 100%*
A 20 A fuse can only be selected if:
-
The country-specific setting has been set to "US"
- The grid lead has a 20 A fuse
- The power source is supplied with a grid voltage of 120 V
* 100% values = welding with no time limits and without cooling breaks.
The welding current data applies at an ambient temperature of 40 °C (104 °F).
A safety cut-out prevents the automatic circuit breaker from tripping at higher welding
powers. The safety cut-out defines the possible welding duration without the automatic
47
EN-US