Fronius TransSteel 2200, Operating Instructions Manual, Page: 132 / 136

Type of cooling AF
Overvoltage category III
Pollution degree according to IEC60664 3
EMC device class
A
4)
Safety markings S, CE, CSA
Dimensions l x w x h 560 x 215 x 370 mm
22.05 x 8.46 x 14.57 in.
Weight 15.2 kg
33.51 lb.
Max. shielding gas pressure 5 bar
72.52 psi
Wire speed 1.5 - 18 m/min
59.06 - 708.66 ipm
Wire drive 2-roller drive
Wire diameter 0.6 - 1.2 mm
0.025 - 0.047 in.
Wirespool diameter max. 200 mm
max. 7.87 in.
Wirespool weight max. 6.8 kg
max. 14.99 lb.
Max. noise emission (LWA) 65.5 dB
Idle state power consumption at
230 V 17.4 W
Power source efficiency at
210 A / 24.5 V 89 %
1) Interface to a 230 V, 50 Hz public grid.
2) Only applies to USA:
If an automatic circuit breaker is used instead of a fuse, the current/time charac-
teristic of the automatic circuit breaker must match that of the mains fuse spe-
cified above.
It is permitted for the tripping current of the automatic circuit breaker to be higher
than the tripping current of the mains fuse specified above.
3) Only applies to USA:
Time-delay fuse conforming to UL Class RK5 (see UL 248).
4) A device in emissions class A is not intended for use in residential areas in which
the electrical power is supplied via a public low-voltage grid.
The electromagnetic compatibility may be influenced by conducted or radiated
radio frequencies.
132