51
EN
Control elements and connections
Safety
Control elements
and connections
WARNING!
Operating the equipment incorrectly can cause serious injury and
damage. Do not use the functions described until you have thoroughly read and
understood the following documents:
-
these operating instructions
-
all the operating instructions for the system components, especially the safe-
ty rules
Item
Designation/function
(1)
Mains switch
(2)
Mains cable
(3)
Dust filter
... where the fan draws in air
-
Prevents contamination of the housing interior if large amounts of dust
haveaccumulated
(4)
Overtemperature indicator
-
comes on when the device is too hot
(5)
Interface indicator
-
lights green when the power source is ready
-
flashes red if there is a fault
(6)
(+) current socket
-
with M12 internal thread
(7)
LocalNet connection
-
for connecting the ROB TSt interface
(8)
Status indicator
-
the status indicators provide information about the type of fault if the interface
indicator flashes red
(9)
(+) current socket
-
with M12 internal thread
(1)
(2)
(4)
(5)
(6)
(7)
(8)
(9)
(3)
Summary of Contents for TransPocket 3500
