28
Setup Menu
Accessing the
Setup Menu
+
Press both buttons at the same time
-
The code of the first parameter from the Setup menu is displayed on the control
panel
Adjusting Param-
eters
Turn the selection dial to select the desired parameter
Press the selection dial to display the set value of the parameter
Press the selection dial to change the value
–
The set value is immediately active
–
Exception: When resetting to the factory settings, the selection dial needs to be
pressed after changing the value in order to activate the change.
Press the selection dial to go back in the list of parameters
Exiting the Setup
Menu
Press Setup 1
or
Setup 2 button to exit the Setup menu
Setup Menu Pa-
rameters
1
1
2
3
4
1
Parameter
Description
Range
Unit
Factory setting (FACtory)
Here the device can be reset to its factory settings
-
Cancel reset
no
-
Reset the parameters for the set welding pro-
cess to the factory settings
YES
-
Reset the parameters for all welding process-
es to the factory settings
ALL
Confirm resetting of the selected value to the fac-
tory setting by pressing the selection dial!
Setup menu 2nd level
For setting general parameters
For details see "Setup Menu 2nd Level" section
