Fronius Symo Hybrid 3.0, Installation Instructions Manual, Page: 12 / 40

Fitting the mount-
ing bracket to a
wall
Tip: Install the inverter so that its display is at eye
level
1 2
3
Note! When mounting the mounting
bracket on the wall, ensure that the mount-
ing bracket does not become warped or
deformed.
Installing the
mounting bracket
on a mast or
beam When installing the inverter on a mast or
support, Fronius recommends the "Pole
Clamp" kit from Rittal GmbH (order no. SZ
2584.000).
This kit enables the inverter to be installed
on round or rectangular masts with the fol-
lowing diameters: Æ from 40 to 190 mm
(round mast), ÿ from 50 to 150 mm (rect-
angular mast)
12