Fronius Symo GEN24 10.0, Operating Instructions Manual, Page: 16 / 120

Operating mode –
Inverter with bat-
tery In order to be able to obtain the highest rate of self-consumption with your PV system, a
battery can be used to store excess energy. The battery is coupled to the inverter on the
direct current side. Multiple current conversion is therefore not required, and the effi-
ciency is increased.
0 0 1
6
7
+
-
PV-Point
Operating mode –
Inverter with bat-
tery and several
Smart Meters
0 0 1
6
7
0 0 1
6
7
+
-
PV-Point
Operating mode –
Inverter with bat-
tery and backup
power function IMPORTANT!
In backup power mode, an increased nominal frequency is used in order to prevent
undesired parallel operation with other power generators.
In the fully equipped hybrid PV system, the inverter can:
-
Supply loads in the house
- Store excess energy in the battery and/or feed it into the grid
- Supply connected loads in the event of a power failure
16