Fronius Symo GEN24 10.0, Operating Instructions Manual, Page: 14 / 120

Intended use The inverter is designed to convert direct current from solar modules into alternating cur-
rent and feed this power into the public grid. A backup power mode is possible provided
that appropriate cabling has been installed.
The following are considered improper use:
-
Utilisation for any other purpose, or in any other manner
- Alterations to the inverter are not permitted unless expressly recommended by
Fronius
- Installation of components is not permitted unless expressly recommended or sold
by Fronius
The manufacturer is not responsible for any damage resulting from improper use.
All warranty claims are considered void in such cases.
Intended use also means:
-
Carefully reading and obeying all the instructions, as well as safety and danger
notices in the Operating Instructions
- Installation in accordance with chapter " Installation ", from page 41
When configuring the photovoltaic system, make sure that all photovoltaic system com-
ponents are operating exclusively within their permitted operating range.
All measures recommended by the solar module manufacturer for maintaining the solar
module properties must be followed.
Follow all grid operator regulations regarding grid power feed and connection methods.
* For inverters of the Fronius GEN24 Plus power category.
Thermal concept Ambient air is drawn in by the fan on the
front side and blown out at the device
sides. The even heat dissipation allows
several inverters to be installed next to
each other.
NOTE!
Risk due to insufficient cooling of the inverter.
This may result in a loss of power in the inverter.
▶
Do not block the fan (for example, with objects that protrude through the touch
guard).
▶
Do not cover the ventilation slots, even partially.
▶
Make sure that the ambient air can always flow through the inverter's ventilation
slots unimpeded.
14