chapter. Ensure that the battery to be charged matches the configuration of the
battery charging system.
2
Plug in the charging plug
The charger detects that the battery is connected and starts charging. If start-up
delay is activated, then charging will start at the end of the set delay time. For
more information, see "Configuration mode" in the "Display" chapter.
During the charging process the display shows the following values:
-
Current charging current (A)
-
Current charging voltage (V)
-
Battery temperature (°C / °F)
-
Current state of charge (%)
-
The time (hh:mm) since charging started
-
The remaining charging time (hh:mm)
(provided the battery is sending this information to the charger)
-
If set:
Primary current limit (A)
Power limitation through calendar setting (kW)
When the primary current limit or calendar-based power limitation are enabled,
the respective limit value is shown on the display while charging is in progress. If
both functions are enabled at the same time, the lower limit is shown.
If the blue indicator is set to "state of charge" (see "Additional functions" in the
"Display" chapter), the blue indicator lights up once the state of charge exceeds a
defined % value.
The battery symbol indicates the current state of charge. The battery state of
charge is stated as a percentage.
If the charging process is interrupted because the "Stop / Start" button was
pressed, the display shows that the charging process has been stopped.
As soon as the battery is fully charged,
the green "Battery charged" indicator
lights up on the control panel and the
charging current is no longer dis-
played.
26
