The individual selection options are explained in detail below.
Electrolyte cir-
culation
Electrolyte circulation "Air Pump"
(not
available with the Selectiva 220 V ver-
sion
):
The sequential control of the electro-
lyte circulation takes place via the bat-
tery charger control unit. Several se-
lection options are available for this
purpose.
The following settings are available for the electrolyte circulation:
Off
-
Electrolyte circulation switched off.
Continuous
-
Electrolyte circulation constantly switched on.
Program 1 to 5
-
Factory-set programs for the electrolyte circulation and their relevant para-
meters can be found in the table in the "Settings" section of the "Display"
chapter.
Automatic
-
Automatic adjustment of the flow rate of the electrolyte circulation based on
the set battery parameters.
User "On"/"Off"
-
Individual setting for the electrolyte circulation.
-
The "On" and "Off" settings determine the pulse/pause ratio of the airflow in-
tervals.
Factory-set programs for the electrolyte circulation and the relevant parameters
are shown in the table below:
40
