Fronius Robacta TSS /i, Operating Instructions Manual, Page: 48 / 100

3. Installing the Robacta Reamer Twin cleaning unit
General A Robacta TC 2000 cleaning unit or a Robacta Reamer Twin cleaning unit can be moun-
ted on the service station.
Tools Required - Torx screwdriver TX25
- 3 mm, 5 mm Allen key
- Slotted screwdriver
- Hammer
- 18 mm wrench
Additionally
required The following accessories are required for installing a Robacta Reamer Twin cleaning
unit on the welding torch service station:
OPT/i TSS Reamer Twin ... 4,001,109
Removing the
Injection Device
and Existing
Clamping System
2
1
1
1
1
1
1
Loosen 5 Allen screws
size 3 mm
2
Remove the housing casing
5
4
3
7
6
3
Disconnect the hose
4
Push the hose inside the device
5
Disconnect the hose
6
Loosen and remove the hexagonal nut
inside the device
size 18 mm
7
Remove the injection device
48