Fronius Pull, Operating Instructions Manual

Page: 55 / 196

Robot welding torch
Safety
CAUTION!
Risk of burns from hot torch body, hot torch body coupling and other hot weld-
ing torch components.
Before starting work on the torch body, the torch body coupling and all other
welding torch components:
▶
Allow the torch body, torch body coupling and all other welding torch com-
ponents to cool down to room temperature (+25 °C, +77 °F)
▶
Wear electrically insulated and heat protective gloves
▶
Use a suitable tool
General
The following torch bodies are recommended for the CMT process:
- MTB 250i / 320i / 400i / 500i / 700i: 22–36°
- MTB 330i: 22°
The following maximum angles are permitted during the CMT process:
- MTB 250i / 320i / 400i / 500i / 700i: 45°
- MTB 330i: 36°
Standard OVT TXi TXM OPT CAM*
*Optional (no torch body)
The robot welding torch transmits the arc power to the workpiece. The gas-
cooled or water-cooled TPS /i welding torch is designed for use with the Crash-
Box /i.
The torch body has an integrated lead for gas nozzle touch sensing.
Standard:
With wearing parts, without contact tip
OVT:
Without wearing parts
TXi:
Automatic torch body changeover
TXM:
Manual torch body changeover
55
EN