5
EN-US
General
Device concept
The Fronius Personal Display DL can be used to display real-time power data from one or
more inverters from any location within range of the device.
The Fronius Personal Display DL also functions as a datalogger.
The recorded data are then analyzed using Fronius Solar.access.
The Fronius Personal Display DL can show power data from up to 15 Fronius inverters.
The various display modes can show power data for the entire system or for each individual
inverter.
The Fronius Personal Display DL is powered via a battery or the power supply included
with the device.
Information on ra-
dio certification
The Fronius Personal Display DL is fitted with an radio module.
In the USA radio modules are subject to FCC requirements::
Changes or modifications of the radio module not expressly approved are not allowed and
will void the user’s authority to operate the equipment.
System require-
ments
The Fronius Personal Display DL can be used with up to 15 of the following Fronius invert-
ers:
-
Fronius IG
-
Fronius IG Plus / Fronius IG Plus V
-
Fronius CL
Different inverter types can also be combined.
The following are required to send data to the Fronius Personal Display DL
a) a Fronius Display Card with a radio antenna for each inverter,
or
b) a Fronius Personal Display DL Box
and
a Fronius Com Card for each inverter.
The Fronius Personal Display DL can be used with a Fronius IG inverter serial number
17xxxxxx and higher.
The datalogging function is not available when using a Fronius Personal Display DL Card
with a Fronius IG inverter.
A Fronius Personal Display DL Box must be connected to a Fronius IG inverter to enable
the datalogging function.
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interfer-
ence that may cause undesired operation.
FCC ID: QKWFRF905
