33
EN-US
ADD IG
Add a new inverter to the system.
See also "Start-up operation" - "Connecting to the inverter."
DEL IG
Deleting inverters from the system
You can delete an inverter from the system so that its data are not displayed by the Fronius
Personal Display DL:
-
Select the desired inverter using the ‘Up’ and ‘Down’ keys.
-
Press the 'Enter' key to confirm the inverter to be deleted
The display flashes.
-
Press the 'Esc' key to cancel the process
or
press the 'Enter' key to delete the inverter from the system
VERSION
Accesses and updates information about
the Fronius Personal Display DL and asso-
ciated plug-in card in the inverter.
Unit
-
Display range
DISPLAY / SW UPDATE / CARD IGxx
Factory setting
-
DISPLAY
Accesses the software version of the Fronius Personal Display
DL
SW UPDATE
The personal display software can be updated if required.
CARD IGxx
Accesses the software version of the Fronius Personal Display
Card in the inverter.
When you press the 'Enter' key, the Fronius Personal Display
DL connects to the selected inverter. You can press the 'Esc'
key to cancel the process.
