26
Display values for
a total system in
the 'Now' display
mode
The Fronius Personal Display DL can show the following power data in the 'Now' display
mode for a total system:
Display values for
individual invert-
ers in the 'Day /
Year / Total' dis-
play modes
The Fronius Personal Display DL can show the following power data in the 'Day,' 'Year' and
'Total' display modes for an individual inverter in the system:
Output power
Power (in Watts) currently being fed into
the grid
Date
When the date on the inverter or a data
communication component is changed,
this changes the date on all devices con-
nected via Solar Net.
Time
When the time on the inverter or a data
communication component is changed,
this changes the time on all devices con-
nected via Solar Net.
Output energy
Energy fed into the grid over the period of
time in question (kWh / MWh)
Due to the variety of different monitoring systems, there can be deviations between the
readings of other metering instruments and the readings from the inverter. For determin-
ing the energy supplied to the grid, only the readings of the calibrated meter supplied by
the electric utility company are relevant.
Yield
Amount of money earned during the peri-
od of time in question (currency can be se-
lected in the Setup menu)
As was the case for the output energy, readings may differ from those of other instru-
ments.
'The Setup menu' section describes how to set the currency and rate for the output ener-
gy. The factory setting depends on the respective country-specific setting.
