Fronius MTG 2100 S, Operating Instructions Manual

Page: 29 / 136

Equipping and connecting the welding torch
Note on inner li-
ner with gas-coo-
led welding tor-
ches
NOTE!
Risk due to incorrect wire-guide insert.
This can result in poor-quality weld properties.
▶
If a plastic inner liner with a bronze wire-guide insert is used with gas-cooled welding
torches instead of a steel inner liner, the power data stated in the technical data
must be reduced by 30%.
▶
In order to operate gas-cooled welding torches at maximum power, replace the
40 mm (1.575 in.) wire-guide insert with a 300 mm (11.81 in.) wire-guide insert.
1
29
EN-US