33
EN
Supply voltages
Supply voltages
IMPORTANT!
The voltages listed above may only be used to supply a robot control output
card. The output cards are usually supplied by an internal power supply on the robot con-
troller. For this reason, pins 5 to 8 are usually unoccupied.
WARNING!
An electric shock can be fatal. Never connect the robot controller
supply to the power supply for the KD 7000 or the power source.
Plug X3/pin 5 ("+ 24 V TIG")
24 V
Plug X3/pin 6 ("GND TIG")
GND (power supply)
Plug X3/pin 7 ("+ 15 V TIG")
15 V
Plug X3/pin 8 ("- 15 V TIG")
- 15 V
Summary of Contents for KD 7000
