Fronius FK 5000, Operating Instructions Manual

Page: 38 / 60

38
3 4
5
Commissioning
the cooling unit
NOTE!
Before starting up the cooling unit, first check that it contains an adequate amount
of coolant and that the coolant is clean and uncontaminated.
NOTE!
During welding, check at regular intervals that the coolant is flowing properly.
You should be able to see a steady return flow of coolant into the coolant container.
The cooling unit is powered from the power source. If the power source mains switch is
turned to position "I", the cooling unit will also start to operate.
3
2 max.
1
3 4
5