Fronius Energy Package, Operating Instructions Manual, Page: 76 / 148

Installing Fronius system monitoring – Overview
Safety
WARNING!
Danger from incorrect operation
This can result in severe personal injury and damage to property.
▶
Do not use the functions described here until you have fully read and under-
stood the Operating Instructions of every system component:
▶
Do not use the functions described here until you have read and understood
all the safety rules.
IMPORTANT! Knowledge of networking systems is required in order to install
Fronius system monitoring.
Starting for the
first time IMPORTANT!
Starting up the Fronius system monitoring function for the first
time is made considerably easier with the Fronius Solar.start app. The Fronius
Solar.start app is available in the respective app stores.
Or visit
https://wizard.solarweb.com to select the desired menu item
IMPORTANT! In order to establish a connection to Fronius system monitoring,
the end device in question (e.g. laptop, tablet, etc.) must be set up as follows:
- "Obtain IP address automatically (DHCP)" must be activated
1
Switch the device to Service mode
- Activate the WLAN Access Point via the Setup menu on the inverter
Relay
Standby
WiFi Access Point
Relay
Clock
Display Setting
The inverter establishes the WLAN access point. The WLAN access point re-
mains open for 1 hour.
76