manualshive.com logo in svg

Fronius Energy Package, Operating Instructions Manual, Page: 109 / 148

Share
Download
Fronius Energy Package Operating Instructions Manual Download Page 109

Specifying a defined charging power

A defined charging power can be specified by setting the min. and max. charging power
to the same value.

Discharging

limit

 

Discharge / charge

0 W

 

 

Charging

limit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Min. / max.

charging

3000 W

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Specifying a defined discharging power

A defined discharging power can be specified by setting the min. and max. discharging
power to the same value.

 

Discharging

limit

 

Discharge / charge

0 W

 

Charging

limit

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Min. / max.

discharging

3000 W

 

 

 

 

Possible applications

-

Time-dependent electricity tariffs

-

Battery reservation for market-specific power limitation

-

Time-dependent capacity reservation for emergency power

PV power reduc-
tion

The battery control parameters make the generated energy as optimally usable
as possible. However, situations may arise in which PV energy cannot be fully
used due to battery control parameters.

Example

 

Fronius Symo Hybrid 3.0-S:

3000 W (max. output power)

Fronius Solar Battery 7.5

   

109

EN

Summary of Contents for Energy Package





















































































































































Reviews:

No comments