Fronius Eco 25.0-3-S, Operating Instructions Manual

Page: 23 / 196

23
EN
Controls and indicators
Controls and dis -
plays
The keys operate capacitively. Exposure to water may impair their function. If necessary,
wipe the keys dry with a cloth to ensure optimum functionality.
Item Description
(1) Display
For displaying values, settings and menus
Monitoring and status LEDs
(2) Initialisation LED (red) lights up
- During the initialisation phase when starting up the inverter
- If, when starting up the inverter in the initialisation phase, there is a contin -
uous hardware fault
(3) Status LED (orange) lights up
- If, after the initialisation phase, the inverter is in its automatic startup or self-
test phase (as soon as the solar modules are delivering sufficient power af -
ter sunrise)
- If status codes (STATE Codes) are shown on the inverter display
- If the inverter has been switched to Standby mode in the Setup menu (=
feeding energy into the grid switched off manually)
- If the inverter software is being updated
(4) Operating status LED (green) lights up
- If the PV system is working correctly after the inverter's automatic startup
phase
- all the time while energy is being fed into the grid
Function keys - allocated different functions depending on the selection:
(5) "Left/up" key
For navigating to the left and up
(6) "Down/right" key
For navigating down and to the right
(7) "Menu/Esc" key
For switching to the menu level
For quitting the Setup menu
(8) "Enter" key
For confirming a selection
(1)
(2)
(3)
(4)
(5) (6) (7) (8)