Fronius DeltaSpot, Operating Instructions/Spare Parts List

Page: 34 / 84

32
Remote control
DeltaRemote re-
mote control
The DeltaRemote remote control is for manual control of the spot welding gun. It is used to
-
reload process tape
- replace electrodes
DeltaRemote remote control
(1) Open spot welding gun button
to open the spot welding gun manu-
ally
(2) Process tape forward switch
(moving gun arm)
for manual feed of process tape
(3) Close spot welding gun button
to close the spot welding gun manu-
ally
(4) Process tape forward switch
(fixed gun arm)
for manual feed of process tape
DeltaRemote Plus
remote control
DeltaRemote Plus remote control
The DeltaRemote Plus remote control is for
manual control of the spot welding gun. It is
used to
-
define a reference point after commis-
sioning the system
- reload process tape
- manual spot welding within predefined
parameters
- reset faults that have occurred
WARNING! Machines that start up automatically can cause serious injury and
damage. In addition to these operating instructions, the safety rules issued by the
manufacturer of the robot and welding systems must also be observed. For your
personal safety, ensure that all protective measures have been taken and will re-
main in place for the duration of your stay within the working area of the robot.
(1)
(2)
(3)
(4)
WARNING! Machines that start up automatically can cause serious injury and
damage. In addition to these operating instructions, the safety rules issued by the
manufacturer of the robot and welding systems must also be observed. For your
personal safety, ensure that all protective measures have been taken and will re-
main in place for the duration of your stay within the working area of the robot.
(1)
(2)
(3)
(4)
(5)
(6)
(7)
(8)
(9)