Fronius Datamanager 2.0, Operating Instructions Manual

Page: 82 / 88

Settings – DNO Editor
General In the "UC Editor" menu item, settings relevant to electricity retailers are made.
An effective power limit in % and/or a power factor limit can be set.
IMPORTANT! Settings in the "UC Editor" menu item may only be made by staff trained
to do so!
The service password must be entered for the "UC Editor" menu item.
DNO Editor – IO
Control " Input pattern " (assignment of individual I/Os)
1 click = white
2 clicks = blue
3 clicks = gray
The virtual IO assignment is displayed as described in the "Settings – IO Assignment"
section (see page
70 ).
The display may be different in older versions of the software.
" Power factor cos phi "
" ind " = inductive
" cap " = capacitive
" DNO output " (feedback output)
When the rule is activated, the I/O 0 output will be activated (e.g., for operating a signal
device)
" Excluded inverters "
Enter the numbers of inverters here that are to be excluded from control. Separate mul-
tiple inverters with commas.
Delete/Add a Rule
+ = add a new rule
- = delete the selected rule
" Import " button – click to import rules in *.fpc format
The function of the "Import" button depends on the browser used, e.g., Firefox and
Google Chrome support the function.
" Export " button – click to save the rules separately in *.fpc format.
82