Fronius Datamanager 2.0 Operating Instructions Manual Download Page 51

Page: 51 / 88

Connecting to Fronius Datamanager 2.0 via a Web

Browser

General

The connection to Fronius Datamanager 2.0 via a web browser is suitable for accessing
current values with several PC users in a LAN (e.g., company networks, schools).

For example, total and daily yields can be accessed and/or inverter comparisons can be
made on the Fronius Datamanager 2.0 website.

Requirements

At least a LAN or WLAN connection

Web browser (e.g., Microsoft Internet Explorer IE

≥

9.0, Firefox 4, Google Chrome

27.0)

PC/laptop in the same network segment as Fronius Datamanager 2.0

Establishing a
Connection to
Fronius Dataman-
ager 2.0 via a
Web Browser

Open the web browser

Enter the IP address or the host name and the domain name for Fronius Dataman-
ager 2.0 in the address field

The Fronius Datamanager 2.0 website opens.

EN-US

Summary of Contents for Datamanager 2.0

























































































Search results

Summary of Contents for Datamanager 2.0

Reviews:

Brands by name

Popular brands

Fronius Datamanager 2.0, Operating Instructions Manual

Search results

Summary of Contents for Datamanager 2.0

Reviews:

Brands by name

Popular brands