Fronius Datamanager 2.0, Operating Instructions Manual

Page: 46 / 88

7
Run the Solar Web Wizard and follow the instructions
The Fronius Solar.web start page appears.
or
The Fronius Datamanager 2.0 website opens.
Starting for the
first time via a
web browser The Fronius Solar.web App makes starting Fronius Datamanager 2.0 for the first time
significantly easier. The Fronius Solar.web App is available from the relevant app store.
To start Fronius Datamanager 2.0 for the first time,
-
the Fronius Datamanager 2.0 plug-in card must be installed in the inverter,
or
- there must be a Fronius Datamanager Box 2.0 in the Fronius Solar Net ring.
IMPORTANT! To establish a connection to Fronius Datamanager 2.0, the end device in
question (e.g., laptop, tablet) must be configured as follows:
-
"Obtain an IP address automatically (DHCP)" must be activated
WARNING!
Danger from grid voltage and DC voltage from solar modules.
An electric shock can be fatal.
▶
Before opening the inverter, wait until the capacitors have discharged.
▶
Follow the Operating Instructions when opening the inverter.
▶
Observe the safety rules and safety instructions contained in the inverter's Operating
Instructions.
1
Connect the inverters with Fronius Datamanager 2.0 or Fronius Datamanager Box
2.0 in Fronius Solar Net
IMPORTANT! Inverters Fronius IG, Fronius IG Plus, Fronius IG Plus V, Fronius IG
Plus A, Fronius CL, Fronius CL USA, and Fronius IG 300–500 must always be loc-
ated at the beginning or end of the Fronius Solar Net ring.
2
For Fronius Galvo/Fronius Symo/Fronius Primo only and when linking multiple in-
verters in Fronius Solar Net:
set the Fronius Solar Net primary/secondary switch on the Fronius Datamanager 2.0
plug-in card as required
-
One inverter with Fronius Datamanager 2.0 = primary
- All other inverters with Fronius Datamanager 2.0 = secondary (the LEDs on the
Fronius Datamanager 2.0 plug-in cards are off)
46