Fronius Datamanager 2.0, Operating Instructions Manual

Page: 19 / 88

General information for the network administrator
Requirements Configuring a network for Fronius Datamanager 2.0 requires knowledge of network tech-
nology.
If Fronius Datamanager 2.0 is being integrated into an existing network, the Fronius
Datamanager 2.0 address must be adapted to the network.
Example: network address range = 192.168.1.x, subnet mask = 255.255.255.0
- An IP address between 192.168.1.1 and 192.168.1.254 must be assigned to Fronius
Datamanager 2.0.
- The IP address selected may not be already assigned in the network.
- The subnet mask must correspond to the existing network (e.g., 255.255.255.0).
If Fronius Datamanager 2.0 will be sending service messages and/or data to Fronius
Solar.web, then a gateway address and a DNS server address must also be entered.
Fronius Datamanager 2.0 uses the gateway address to access the internet. The IP ad-
dress of the DSL router can be used as a gateway address, for example.
IMPORTANT!
- Fronius Datamanager 2.0 may not have the same IP address as the PC/laptop!
- Fronius Datamanager 2.0 cannot connect itself to the internet. A router must be
used for a DSL connection to the internet.
General Firewall
Settings DSL routers mostly enable you to send data to the internet and, therefore, do not nor-
mally have to be configured.
Server addresses for data transfer
If a firewall is used for outgoing connections, the following protocols, server addresses
and ports must be allowed for successful data transfer:
-
Tcp fronius-se-iot-dm-1.azure.devices.net:8883
- Tcp fronius-se-iot-dm-1.azure.devices.net:443
- Tcp fronius-se-iot-dm-2.azure.devices.net:8883
- Tcp fronius-se-iot-dm-2.azure.devices.net:443
- Tcp fronius-se-iot-dm-1.telemetry.azure.devices.net:8883
- Tcp fronius-se-iot-dm-1.telemetry.azure.devices.net:443
- Tcp fronius-se-iot-dm-2.telemetry.azure.devices.net:8883
- Tcp fronius-se-iot-dm-2.telemetry.azure.devices.net:443
- Fdmp-solarweb.com:49049 (dm local port 54321)
- Tcp http://www3.fronius.com:80
- Tcp ftp://transfer.fronius.com:21
- Tcp provisioning-lite.solarweb.com:443
- Tcp froniusseiot.blob.core.windows.net:443
If existing firewall rules block the connection to the Fronius system monitoring, the follow-
ing firewall rules must be added:
49049/UDP
output
80/TCP *)
input
Sending service messages x -
Connecting to Datamanager via Fronius Solar.web x -
19
EN-US