Fronius Calibration system 2.0, Operating Instructions Manual

Page: 20 / 100

Required for calibration
Computer &
software - Computer, laptop
- Calibration software
The calibration software can be downloaded from:
https://downloadcenter.myfronius.com
Software/Firmware
Firmware
„Calibration“
Fronius internal:
https://collaboration.fronius.com
Collaboration Perfect Welding / Products & Services PW
General Topics / Services
Securing Services
Categories / Calibration
04_cal_software_releases
Hardware & ac-
cessories
- Calibration system 2.0
- Interface calibration system
- Welding wire calibration system
- Accessories calibration system
- Trolley calibration system
Required for cal-
ibration of the
WeldCube Con-
nector For the calibration of WeldCube Connector U/I and WeldCube Connector Ad-
vanced:
- PoE injector, RJ45 30 W / 802.3at / PoE+ (42,0411,0213)
- M12-X / RJ45 network cable, 5 m (42.0411.0232)
- TPS 500i power source
For the calibration of WeldCube Connector U/I/WFS WSM and WeldCube Con-
nector Ad WSM:
- PoE injector, RJ45 30 W / 802.3at / PoE+ (42,0411,0213)
- M12-X / RJ45 network cable, 5 m (42.0411.0232)
- Existing TransSteel system components
- 70/95 DIX KAB socket splitter (43,0003,0704)
20